Printech Microwave PCB's
Printech uses a wide range of PTFE, ceramic and thermoset materials from all of the major suppliers including Rogers, Taconic and Arlon
Printech can process all of the most commonly used microwave materials in house and use them in various builds from standard PTH to complex assemblies.
One of our recent applications here at Printech is the manufacture of Printed Circuit Boards with embedded components soldered and bonded within the multilayer structure.
| Single and double sided PTFE circuits | ||
| Plated and non plated PTFE soft boards | ||
| Compression bonded PTFE assemblies | ||
| Metal backed PTFE boards | ||
| PTFE Tri-plate assemblies | ||
| Embedded component multilayer | ||
| Capabilities | Standard | Technical | |
| Track and gap | 0.1mm(0.004") | 0.05mm(0.002") | |
| Min Hole Size | 0.3mm(0.012") | 0.1mm(0.004") | |
| Track Width Tolerances | 25 microns (0.001") | 10 microns(0.0004") | |
| Hole positional tolerances | +/-0.05mm(0.002") | 0.002mm(0.0008") | |
| Hole diameter tolerances | +/-0.05mm(0.002") | +/-0.025mm(0.001") | |
| Profiling Tolerances | +/-0.1mm(0.004") | +/-0.05mm(0.002") | |
31-35 Haltwhistle Road, South Woodham Ferrers.
Chelmsford.
Essex,
CM35ZA
Tel:+44(0) 1245 323244 Fax:+44(0) 1245 329472